Click image to view full size image
main parameters
| 65 | 125 | 320 | ||||||||
Bending radius R | 75 | 90 | 115 | 145 | 180 | 200 | 250 | 500 | 600 | ||
125 | 145 | 185 | 300 | 320 | 350 | 400 | 650 | 700 | |||
450 | 470 | 500 | 535 | ||||||||
|
|
| 575 | 600 | 700 | 750 | 800 | 900 | |||
Pitch T | 65 | 125 | 320 | ||||||||
Minimum width of drag chain | 70 | 120 | 350 | ||||||||
Maximum width of drag chain | 350 | 550 | 1200 | ||||||||
Max.hole diameter of supprt plate | 30 | 70 | 200 | ||||||||
Lengh of drag chain | By user | ||||||||||
Rectangle hole | 25 | 65 | 260 | ||||||||
link height hg | 44 | 96 | 300 | ||||||||
1.The chain plate with arc sliding slotted holes is made from a thickened plate,which greatly enhances the intensity.
2.2 metal bracing pieces are installed between two supporting board to enhance the anti-twisting capacity of the drag chain,and the intensity is greaatly enhanced.
3.There is no dead angle, and no rust, therefore,the service life is longer.
4.The thickened plate without joint is of high intensity.
5.No error.
6.The company adopts laser engraving technology and uses 45# steel,which greatly enhance the intensity.
7.The chain plates with arc sliding slotted holes are engraved with laser.
8.There is no spilliness and burr ,and the surface is highly polished.
9.The surface of the chian plate is vertical with the processing surface.
10.For non-standard drag chain, it does not need extra expenses on dire and extra time.
drag chains
